SUBDIVISIONS APPENDIX B. - PRELIMINARY AND FINAL PLAT REVIEW AND APPROVAL FORM


General Requirements

Name of subdivision _____

Name of owner(s) _____

Date submitted ____________ checked by _____

Required number of copies of plat submitted _____

Topographic map required:   Yes ____________ No ____________

Location of subdivision (Section, Township and Range) _____
_____

Has plat been prepared at the appropriate scale:   Yes ____________ No ____________

Present zoning classification of area _____

General Platting Requirements

Preliminary Plat
Final Plat
Yes No Yes No
1. Is the subdivision laid out to conform with the approved master plan of the area? _____ _____ _____ _____
2. Does the street pattern discourage through traffic? _____ _____ _____ _____
3. Do the streets intersect at as nearly 90 degree angles as possible? _____ _____ _____ _____
4. Are the number of streets converging at one point kept to a minimum? _____ _____ _____ _____
5. Have provisions been made for principal local streets to be continued in adjacent subdivisions without creating hazardous jogs or angles in the thoroughfare pattern? _____ _____ _____ _____
6. If cul-de-sacs are shown, do they:
a.  Have adequate turn around facilities? (100 feet diameter minimum) _____ _____ _____ _____
b.  Remain a conventional length of not more than 600 feet? _____ _____ _____ _____
7. Are blocks a normal size (approximately 1,000 feet in length)? _____ _____ _____ _____
8. If a block is excessively long (1,200 feet), has a pedestrian crossing been provided in the middle of the block? _____ _____ _____ _____
Required Physical Improvements
1. Has due consideration been given by the subdivider regarding dedication of that portion of land necessary for public use? (school sites, park sites, etc.) _____ _____ _____ _____
2. Have all necessary easements for utilities been checked to determine whether they meet the requirements of the utility company? _____ _____ _____ _____
3. Have the locations, widths, and other dimensions of proposed streets, alleys, lots, easements, and other open spaces been clearly shown? _____ _____ _____ _____
4. Are all blocks and lots properly numbered? _____ _____ _____ _____
5. Do all streets and courts shown on the plat bear tentative names? _____ _____ _____ _____
6. List of the names of streets, courts, of boulevards shown on the plat.
a.  _____
b.  _____
c.  _____
d.  _____
Do any of the tentative names listed conflict with any existing street names? _____ _____ _____ _____
7. Is the accurate location and description of all monuments clearly shown? (Permanent monuments of natural stone or concrete should be set to finish grade at such critical points as will enable any skilled surveyor to lay out correctly any lot in the subdivision.) _____ _____ _____ _____
8. Has the length of lines of all lots, the length and bearing of the lines of all streets, alleys, and easements, the length of all arcs, and radii, the points of curvature, and the tangent bearings in the case of curved lines been checked by the county road superintendent? _____ _____ _____ _____
9. Do all necessary signatures appear on the plat? _____ _____ _____ _____
10. Is the north point, date, scale, and name of the firm which designed the plat clearly shown? _____ _____ _____ _____
Zoning Ordinance Requirements
1. Does the zoning classification of all parcels of land appear on the plat? _____ _____ _____ _____
2. Are all lots delineated of adequate size to meet the requirements of the appropriate zoning classifications? _____ _____ _____ _____
3. Will a performance bond be required? _____ _____ _____ _____
4. Performance bond set at $ _____
Approval Granted
1. Preliminary plat: _____ _____
2. Final plat: _____ _____
List of all suggested revisions or changes.
1. ____________
2. ____________
3. ____________
4. ____________

 

sub-apb-1.png

Procedure for Plat Approval